LogoSuperchute Construction Debris Chutes

LET GRAVITY DO THE WORK

SUPERCHUTE® polyethylene trash chutes are the choice of suppliers & contractors throughout North America. Superb ease-of-use and durability provide a quick, clean, & safe solution. Our designs have been perfected to provide you with the right tool for debris removal.

 

IDEAL FOR: Builders • Roofers • Scaffolders • Masons • Demo Contractors • Supply Houses • Rental Stores • Renovators

Superchute® sections are tapered tubes that attach quickly & easily to one another using built-in cable assemblies. Create chutes up to 200 ft. in length. Use Chute Hoists to install and support the chute.

Entry sections allow debris to be cleared from any floor level, and are equipped with Cable Gates as required by OSHA.


Welded Sections

(Permanent tubes)

 

Wraparound® Sections

(Can go flat)


 

 

 

 

 

 

 

 


All Superchute® sections are:

  • 4 foot tall (because linked sections overlap a little, 3 sections provide 10 ft. of drop).
  • slightly tapered (only 1 inch taper - tight fit minimizes airborne dust).
  • equipped with safe & strong cable linking hardware.
  • branded with your company name.
  • outstandingly resistant to abrasion, chemicals and cold.
  • lightweight, safe, flexible, and quiet in use.
  • made from yellow UV treated plastic.

Superchute® sections are designed for temporary use.

 

Six Chute Diameters Available
18"23"27"30"33"36"

 


 

STEEL LINERS

Use our steel liners to protect heavy-wear areas in your chute system.

Superchute® liners feature:

  • 14 gauge galvanized steel construction
  • brackets for easy attachment to the wall
  • two hand-holds
  • painted diameter specs

They can be used on:

  • the last few sections curving into the container
  • the back wall of a door section
  • the back wall of a top hopper

We make our chutes in six different diameters, and have a matching liner for each one.

Diameter of chute
Weight of a liner
18"
23 lb.
23"
32 lb.
27"
37 lb.
30"
40 lb.
33"
48 lb.
36"
53 lb.

 

Chute Hoists

MODELS AVAILABLE

Consider a Superchute® hoist for safer, quicker & easier installation of Superchute® sections.

A chute hoist solves the two obstacles that installers face:

 
 

1) Hoisting the chute
2) Anchoring the chute to the building

Superchute® hoists can be installed on scaffolds, floor slabs, roofs, and windows.

All the designs are engineered and feature:

  • a 3:1 safety factor on the support frame
  • easy assembly using locking pins
  • a removable Fishpole
  • fast assembly (only 10 minutes!)
  • galvanized steel construction
  • the ability to work with a crane (except the Forklift Frame)

Bolt Down Frames
models: 250 lb capacity
               500 lb capacity*
               750 lb capacity
               1000 lb capacity

Scaffold Hoists
models: 900 lb capacity*
               2000 lb capacity

Forklift Frames
model: 900 lb capacity*

Roofer Hoists
models: 300 lb capacity
               605 lb capacity
               905 lb capacity*

Window Loadspreaders
models: 350 lb capacity*
               600 lb capacity


Hoisters
models: 610 lb capacity
               900 lb capacity
               2000 lb capacity* (concrete deck req'd)

* = model shown


WARNING! Superchute® chute hoists are only intended for use with Superchute® chute sections.

 

 

 

 

Scaffold Service, Inc.
Main Office
2525 Wabash Avenue
St. Paul, MN 55114
Call us toll free at: 1-800-237-0417
Tel: (651) 646-4600 Fax: (651) 649-4399
E-mail: information@scafserv.com

RiggingMotorsStages & Cages